Panasonic S1ii vs S1iie vs S1rii: Comparing the latest lumics lineup

Comparison of s1ii lineup

Panasonic is now selling three hybrid cameras placed in the same body with similar characteristics: S1ii, S1rii, and S1iie. However, they are all separate sensors, which make them better for a special type of shooting.

We will go to those differences and in this process, discuss what each model is best for.

Overview

All cameras in the S1II series are usually aimed at the purpose of hybrid shooters that take both stils and videos. What separates them is their sensors. S1iie has the most familiar option of the bunch, with a standard 24MP BSI CMOS sensor shown in cameras such as Lumix S9 and S5II.

The S1ii is still 24MP, but rapidly steps up to a ‘partially stacked’ sensor with the readout circuitry. This is aimed at the purpose of those who require high burst rates or higher frimits in the video with low rolling shutters. The S1RII focuses on the resolution vs. speed and is equipped with the 44MP BSI CMOS sensor, which will capture the higher expansion in the stils and allows for 8K video recording, while other models top 6K.

Photo burst rates

All cameras of the S1II series can shoot up to 10fps with their mechanical shutters, which have been rated for 400,000 acts and can be configured to close when you turn off the camera to protect the sensor from dust. The difference occurs when you begin to use electronic shutters.

Any camera is not paid as an action cameras, but it is worth noting that their separate burst rates and resolutions also affect how many pictures you can take before filling your buffers. S1ii can shoot Raw at its maximum speed for about three seconds for approximately 200 seconds, while S1iie can go for about six, capturing about 180 images. S1rii can shoot for about one and a half seconds at its maximum burst rate, taking around 70 frames.

Aadhaar ISO

Second-Gy S1 cameras are all Double conversion advantage sensorWhich will produce cleaner images in high ISOS. However, each camera consists of their standard photo style response mode separately and high settings.

For S1ii and S1rii, what response mode you are shooting and depends on that you are using their respective dynamic range boost and expansion mode. It is worth noting that these two modes work quite differently – with S1ii, Dr. There is also no second profit mode in the boost – but we will cover it more deeply later.

video resolution

The S1rii S1ii line has the only camera that can shoot on 8K UHD, although it cannot handle DCI 8K considerably; Instead it has 8128 x 4288 ‘8.1k’ mode, which has the same 1.89: 1 aspect ratio. They can be theoretically delivered resolution, as there are 8K displays in the market, while the 4K options for S1ii and S1IIE are more likely to use 4K options as they introduce in any additional wigley-room or detail off post as they want to distribute 6K displays.

However, those looking for flexibility also want to use 3: 2 open-gate resolution. Both S1ii and S1iie can also shoot 6K Open-Gate, using full sensor to produce 5952 x 3968 3: 2 image up to 30fps. S1rii can currently shoot up to 6.4k open-gate up to 30p, but Panasonic has promised to add 8.1k open-gate mode to S1rii via a firmware update, although the company has not given a date to be available.

Video frimrets

While the same maximum resolution and frimit is in S1ii and S1iie, the difference occurs in the moment when you move away from 6k open-gate.

Despite its length, this table only shows the selection of video mode of each camera. However, this is broadly depicting their high-level capabilities. S1iie can only use the full 60p in 4K as well as 4K in 4K perfectly use aspect ratio, which still captures the APS-C-shape part of the sensor only broadly. S1ii, meanwhile, can capture up to 4K and up to 60p up to 60p without crops. S1rii will need to apply a small crop to get 60p on those proposals, but actually manages to be a slightly smaller crop than S1ii on 4K120p.

rolling shutter

Rapid rolling shutter rate, low risk there is to achieve gelo-effects when shooting rapidly growing subjects when using panning or electronic shutter in the video.

When it comes to readout speed, the S1ii is the fastest of the bunch; It can read the data required for its standard UHD 4K mode in 12.5 ms, taking S5IIE 21.6ms to do something like this. Meanwhile, S1rii takes 23.9ms. Whereas in those numbers typically indicate how cameras in shutter performance compared to each other, both S1ii and S1rii are modes that can significantly reduce their performance. But to talk about them, we need to talk …

dynamic range

Panasonic says that while shooting in S5ii, S1ii V-Tog, “14+ Stop+ Dynamic Range can capture, while S1RII is claimed to be capable of 13 stops. However, both S1ii and S1rii have mode, which when activated, will capture an additional stop of the dynamic range.

However, they work in very different ways and have different boundaries. Both Aadhaar increase the ISO (to expose to catch the additional DR). They also affect both rolling shutter rates, but up to a very different degree.

The mode of S1rii receives it by reading the readouts up to 30%by reading only on a high-departure. And while the rolling shutter of standard mode is compared to cameras like S1H, DR expansion mode means that you probably want to reserve its use for scenes with small movement.

Panasonic says that the Dr boost mode of S1ii uses some combination of its readout mode with different profit levels. It does not have a parallel readout system of GH6 and GH7, and the rolling shutter is more than doubled. This also means that there is no other benefit step to move forward for low-light work.

conclusion

A lot is going on in the S1 line of the second generation of Panasonic, but large and large, cameras occupy their own location. S1iie is a hybrid camera with solid workflow features and ergonomics, but otherwise there is a relatively basic imagination sheet, while S1ii is designed for speed, and S1rii is designed for high-resolution shooting. When it comes to video shooting, all three are highly capable, although the above benefits of non-E models still apply.

Where things are slightly more complex, the price is. S1iie retails for $ 2500, which is significantly cheaper than S1ii’s MSRP’s $ 3200 and S1rii’s $ 3300 price tags. The relatively small value difference between the latter two cameras means that your use, not your budget, should be a decisive factor between the two.

Source link